Indie game storeFree gamesFun gamesHorror games
Game developmentAssetsComics
SalesBundles
Jobs
Tags

Bugs, Problems, and More! Sticky

A topic by desiran created Mar 12, 2023 Views: 882 Replies: 47
Viewing posts 1 to 9
Developer

Lemme know if you run into anything here. I’ll take a look at it and try to fix it.

Yooo, windows version kept crashing at the 4th level "More in the Suburbs" where you can first put 2 bois in, when i put a kerrat and blocter together. It seemed to work when i put 2 blocter's together tho, not really sure why it do that lol. Everything else has been alright so far!! Will say more if i see more.

Developer (1 edit) (-1)

(you and i looked at this and could not reproduce it. if anyone else has it happen, let me know)

yeah, the program just crashed after getting the second karrat. Everything else is going fine

Developer

damn! windows version? i’ll do some more testing to see if i can figure out what’s causing it

(+1)

Yes windows, I installed Vulcan to see if it would fix it. Didn't work immediately but eventually it worked perfectly🤗

The game keeps crashing on mission interference. I cannot progress past it.

Developer (2 edits)

Shoot, I’m sorry to hear that. Is it crashing at the beginning (once you select a mission and pick your creatures), or at the end (after the mission is over and it’s transitioning back to the desktop)?

And, are you on Windows or Linux? CPU/GPU? Vulkan version? You’re not the only person reporting crashes so I wanna get as much info as possible to fix it.

Man sorry for the late reply. I've been absolutely swamped with work. I'm running the windows version and I imagine i'm using the vulkan version. I don't know how to check. But what happens is it crashes during the 2nd and 3rd turns a lot. Sometimes later tho too.

Developer

Hm okay, so it’s mid-battle. Could you try using the v1.0.1 build instead? It’s the newest download

(1 edit)

i will try that

Developer

Ok, I found the crash you were talking about - if it wasn’t already fixed in v1.0.1, the new v1.0.2 build should help. Let me know!

I can't seem to load the demo at all, I get a memory exception each time.

Developer (1 edit)

shit

is it stuck at the bootup screen thingy

I managed to completely miss your Vulkan warning, and while my graphics card is supported, it seems that my current driver is 531.29, which is greater than all the Vulkan 528.2.0.0 listed on that reference site.

Developer

hm, then it definitely should work. are you getting a popup like this: https://itch.io/post/7330310 ?

Yeah, I see the splash for your team, and a bunch of things about connecting to a server and such. Then the screen goes blank.

I then get a memory exception saying that an instruction was on 0xFFFFFFFFFFF and isn't readable

Developer

holy hell that’s a big one. i’m gonna need a lil more information to figure this one out

what’s your:

Operating system (windows/linux) CPU GPU ?

I'm using Windows 10, i7-8700K 3.70GHz, NVIDIA GeForce GTX 1070 Ti.

I may of added too many Fs... I wasn't able to get the error to occur again since I've started to play around.

(+1)

Huh... then I ran it again, and I got the "Enter your name" screen.... so the issue seems to be intermittent (yaaaay, the best kind ;--;)

I wish you luck in digging into that as I dig into some critter situations

Developer

howdy - the engine has been updated, and so has the game. lemme know if it’s working for you now

(2 edits) (+1)

hi i am also experiencing this:

https://ibb.co/stxcPmt

DX Diag reports:

https://ibb.co/Kr0w5mC

https://ibb.co/52TvGBW

https://ibb.co/ZNYxdDJ

https://ibb.co/cxG7vrJ

https://ibb.co/z8T5nhJ

(FROM DXDIAG USING 531.54) -- ALSO TESTED ON LATEST 531.61

I went and tried to run it from command line several times :

https://ibb.co/N6CCvM

^ (crash, no GUI error, both as user and admin. this one happened most often)

https://ibb.co/s6WWCDD

^ (crash, no gui error. blank error message before exiting. sometimes it would just print nothing, not even an error message.)

https://ibb.co/GMbFPgq ^ (crash, memory error)

many times it will just crash without printing anything

dunno if all these errors are related but they do all happen at the same time -- after the game has the starting graphical login message, it goes black for about 10 seconds and crashes.

tested on both my C drive which is two SDD's in raid 0, and on my D drive which is one 3 and a half TB HDD. I have two monitors, differing resolutions. if it helps I literally reinstalled windows 10 yesterday, so it's pretty clean. just have nvidia drivers, steam, discord, some internet browsers, and this. I also went and installed the vulkan sdk and runtime as well as visual c++ redists just cause.

good luck chucklefuck

Developer (2 edits)

this is an incredibly detailed bug report and i appreciate that. i’ll give ‘er a look, might be out of my control if it’s an engine bug (i really hope not)

have you done a memtest?

(1 edit)

clean as a whistle

if the prototype was made on the same engine i can run that later to see if thats an issue.

also if you have any other ideas for tests i can do lay em on me

edit: prototype worked fine.

Developer (1 edit)

well, at least it’s not your memory lol

prototype used Godot 3.5, full game uses Godot 4.0.2, so there’s an entire rewrite in-between

the fact that the prototype worked fine does suggest to me it’s an engine problem, the code used for the startup screen absolutely was present in the prototype.

cursory searches say that error comes from C++ pointer problems, which definitely means it’s on the engine side. nothing i can do about it until it gets fixed upstream, sorry about that

buh. oh well

Developer

howdy - the engine has been updated, and so has the game. lemme know if it’s working for you now

nope
https://ibb.co/0XKvD2J
https://ibb.co/Ss9pDbJ

same deal seems like

Developer

damn it! i wish i could recreate it on my end

if you can think of any tests i can run or programs i can install I'll try em

On the stage Interference, I took Klink and Prinz, and for some reason the Howlquill in that encounter simply stopped acting after the first round or 2. I know I used blowjob with Klink and present with Prinz (all default names).

Developer

Hmm, alright. That’s the second report I’ve had with Interference, I’ll look into that, thanks

Of course! I also want to point out that I found this happen in many encounters. I'm sorry I don't have more information since I played last night, but it does occur in more than one mission.

Developer (1 edit)

Sure! Your information was definitely a help. I think I found what was causing that issue - it has to do with the elite enemies’ script, it should be fixed in the next version (1.0.3).

Deleted 127 days ago
Developer(-1)

I’m torn, honestly - I do understand where you’re coming from. It’s a strategy I borrowed from demos I used to play. I have a vested interest in having you get the full game, and that’s what the popup is intended to do. I don’t think I will remove this, sorry.

Hellooo, I am not sure how to reach the report logs but I am getting a similar memory issue from what this is telling me
the info I can give is I am running Windows 10
GPU: Nvidia Geforce RTX 3070
Processor: AMD Ryzen 9 3900X 12-Core Processor

Developer (1 edit)

The through-line in all this is NVIDIA GPUs; all three ppl who have reported it use an NVIDIA card. Unfortunately, it’s an engine problem, and I can’t fix it myself. I’ll let you know when a new version of the engine is released, and will do a new build then. Sorry about that.

If you DO want to find the logs, they’re in %APPDATA%/Wrangler/logs

(+1)

ahhh okay thank you so much and I really appreciate the response! <3

Developer

howdy - the engine has been updated, and so has the game. lemme know if it’s working for you now

Logs

Vulkan API 1.1.95 - Forward+ - Using Vulkan Device #0: NVIDIA - GeForce GT 740M

USER ERROR: Expected Image data size of 480x270x4 (RGBA8 without mipmaps) = 518400 bytes, got 16384 bytes instead.

   at: initialize_data (core/io/image.cpp:2206)
after booting it just crash without errs 

prototype version works

Developer

will give it a look, thanks for the logs

Developer

hi! i just pushed v1.0.7 - try that and lemme know if this fixed it

(+1)

Yep, it's works pretty well