Thanks for the reply and information. What is happening is that I see movement in all four of the dots and I do the calibration and sometimes the throttle movement is fine but there is no yaw movement. Also on the right stick, I get pitch movement just fine but there is no roll movement. On assigning the dots, if at first I move the throttle stick to see which dot moves and then click on that dot until it shows thr, then move the throttle stick again, the next dot to the right moves and that stick becomes either pitch or roll. It seems that none of the settings are staying permanent. Also, if I try to assign each dot to each stick movement, when I get to the last one the screen says "Done" and goes to the trim screen before I can calibrate the sticks. BTW, I just recently did a firmware update on my Q X7 and I also updated my version of Freerider Recharged if that information helps anything.