itch.io

Changed the sequence of launching applications.

If you launch the TM TARGET profile after launching FoxVox, everything works great.

The lines AF Elevator AF Aileron appear and everything works great

Thank you very much. That's what I did.

If you use just Warthog without TARGET profile in FoxVox the whole range of axes is available.

But if you use a profile that combines stick and throttle into one HID device, this is needed for fine tuning of stick sensitivity, FoxVox loses values between 0 and 50.

Input nose down and left aileron work at 0 which comes immediately after 50 with minimal movement of the stick.

Nose up and right aileron do not have such a problem since FoxVox has full sensitivity from 50 to 100.

P.S. Also on the MJOY 1.3 device FoxVox does not see the axes, it only sees the buttons.

Once again, thank you very much for your wonderful application

Thank you for the wonderful program.

When trying to configure the axes in FoxVox VCC, I use the Thrustmaster TARGET HID combined device

FoxVox normally sees axes from 50 to 100. From 50 to 0 there is a sharp transition.

In Falcon BMS and other applications, these axes are displayed and work completely normally.

I would be grateful for any help.