itch.io

So I installed windows 10 and it did not do the trick :( 

I plugged in my controller and messed around with it. I have tried two different SD cards and formatted them to fat32. 

I did the thing with my NES for the cic. hit reset 7 times. 

Even though I can use the USB tool from Krikzz to access, update my everdrive etc, I think there is some connection issue with my USB nav to the SynthNes. 

I use a Mele Quieter 4C. Maybe there is something in it´s usb setup which SynthNes does not like. I am quite bad at computers and this kind of stuff :) But I read somewhere that if you have connections issues you should try to connect usb directly to motherboard usb and not hubs. Maybe this is the issue with my setup. 

I'll get my cables tomorrow hopefully, then I´ll test the everdrive on my TV with rom games. 

Have you used windows 10 with SynthNes? I could maybe try to install it on my pc and see if that would do the trick. 

Hi again! So I got a second NES-001 PAL, and tried again with no luck. Using the USB tool from Krikzz I can see that the connection to the Everdrive is working. I have posted two pics here so that you can see. Any ideas on what I should try next? I really want this to work :)

Hi, thanks for support! I have ordered cables to be able to connect to TV together with a replacement pin connector. I fear that even though I get a solid red light on the NES it might be a Grey screen trouble. I will update you here once I have tested with the new connector.

I just got my Everdrive N8 Pro and I am trying to get everything up and running. I got a NES-001 for the record. 

So the PC is on, the Synthnes.exe boots up just fine. The nintendo has a solid red light and the "pling" sound from the USB to PC connection sounds when I turn on the power on the NES. But when I klick the "Deploy Rom" I get an error message saying: 

"Could not connect to the everdrive. Please make sure the USB cable is plugged in and the NES is powered on". I have tried with 4 different USB cabels and it does not help. 

Any suggestions on what I should do?

One thing I have thought of is if I need to setup the everdrive in some way as it is new. I have not connected my NES with the everdrive to a TV, as I don't have the cables for doing so at the moment. I have downloaded the latest everdrive OS and placed it on a SD card.

It´s no probelm :) Just wanted to know. Planning on building an Arduino midi controller designed for Synthnes and needed know what I had to work with.

Hi! thanks for making this project, really awesome! So I had a question or two :) Can i map my own midi CC or are the ones in the manual set? Also the CC reference in the manual, is that all parameters which can be midi mapped or can I map other stuff as well, like for example the transpose buttons, invert buttons etc. Would be happy for answer! thanks