I have a Windows 10 and a Taranis Q X7 and when I go to calibrate controller all my stick circles are down even with sticks centered. When I move sticks only left stick at up and right move but digitally not like analog. And right stick does the same. I check my controller properties and I'm getting graduating movement and all axis. My weights and offsets are at 50 in mixer and input on controller model setting. I also try removing vjoy. It was working and I think windows did an update and now it doesn't work. What can I do?

The first thing I would try if I were you is to try both a default model file and a model file with the offset described in the Frsky setup document:

https://drive.google.com/file/d/0BwSDHIR7yDwSOGhPMTFyWEpDVWM/view?usp=sharing

That way you should be able to figure out if the cause is the model setup itself.

If you are suspecting the problem might be an update of the Taranis drivers you can check this post for clues:

https://oscarliang.com/opentx-usb-joystick-mass-storage/

If it was working before and an automatic Windows update caused it to stop working I can suspect that it has something to do with your systems USB input/joystick drivers.