Hi Nate, 

The extra space in the Runcam Orange sleeve is the marked amount in the picture.  When the camera is pushed forward against the front bumper the extra space in the back is shown in the second picture. The tightness of the sleeve itself is probably ok if this extra depth is deleted.

Thank you Patrick,

I have gone ahead and added 0.5mm of material to all 4 walls (equalling 1mm reduction on both width and height). I have also added 4mm of material on the back to reduce depth. I am building a quick patch right now that will include this model. It may require further refinement. The patch will also address the clipping issue. Should be live tonight.

I'm exited to try the software... and yes, will give lots of feedback for sure!