I have a Taranis qx7 on a windows 10 laptop. Weight and offset is setup on the taranis and the computer recognizes controller inputs (driver shows movement on all stick directions). But when i go to calibrate controller the dot go from low at center sticks to high at full deflection but to only one side. The dots are not in the center if sticks are in the center and it will not calibrate. How do I fix this?
Hi,
From what you describe it sounds like you need to make the setup accoring to the Tatanis setup document:
https://drive.google.com/file/d/0BwSDHIR7yDwSOGhPMTFyWEpDVWM/view?usp=sharing
(The endpoints need to be set up to go from 0 to +100 instead of -100 to +100)
You can also find some general information in the manual:
https://drive.google.com/file/d/0BwSDHIR7yDwSelpqMlhaSzZOa1k/view?usp=sharing
There are also many videos on Youtube that shows how the calibration procedure should look. For example:
youtube.com/watch?v=uNJw_RDCD78
Also, there was an automaitc Windows 10 update that broke the USB input on some machines. Don't know if it applies to you but I thought I might mention it just in case.SB drivers. You can find more information here:
https://drive.google.com/file/d/1wF9BgUEZSSCORfa4lauR_EivjLp8ohZJ/view?usp=shari...
If you can describe more clearly what the dots are doing during calibration (and later on the trim settings screen) I might be able to help.
